Toll Free: 800-325-3915   Local: 573-897-3672

MPFSE Line – Serrated Applicator Squeegee

MPFSE Line – Serrated Applicator Squeegee

This squeegee is designed as a lightweight yet rugged epoxy applicator with a dual-edge rubber blade. The non-marking gray Neoprene rubber blade works as a “BUILT-IN” refill that can simply be removed and flipped over. Changing the blade is quick and easy without the use of additional tools. Available with 1/8, 3/16, or 1/4 inch serrations.   Made in the USA.

  • Lightweight aluminum frame
  • Built-in refill blade
  • 5/16” x 2.5” Neoprene rubber blade
  • Steel socket accepts a 1 1/8” tapered handle
  • Dual-edge refill blade is MPFSER Line

Lengths Available:

MPFSE-15 ─ 15″ Floor Squeegee
MPFSE-18 ─ 18″ Floor Squeegee
MPFSE-24 ─ 24″ Floor Squeegee
MPFSE-30 ─ 30″ Floor Squeegee
MPFSE-36 ─ 36″ Floor Squeegee

 

Physical Properties

Dimension .250"x2" (400 line is 3 ply x 2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Fair to Good
Heat Resistance Fair to Good
Resilience or Rebound Very Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Good
Impermeability, Gas Fair to Good
Weathering Resistance Very Good
Low Temp Limit -10°F to -50°F
High Temp Limit 225°F

Chemical Resistance Properties

Acid Good
Alcohols Very Good
Aliphatic Hydrocarbon Solvents Good
Alkali Excellent
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor to Fair
Oil & Gasoline Fair to Good
Oxygenated Solvents Poor to Fair
Water Good
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.