A great squeegee to use as a window or applicator squeegee.  The plated-steel frame provides ideal combination of strength and economy, and the white blended blade yields a high-performance for windows and applying epoxy or other substrates.  The blade is non-marking.  

• Plated steel frame
• 3/32×1 white blended blade

Floor squeegee that features a high performance gray EPDM rubber blade that resists marking floors.  The blade exhibits excellent chemical resistance and high and low temperature properties.  This is one of Haviland’s most requested floor squeegees. Made in the USA.

• 14 gauge red powdered-coated frame
• 1/4” x 2” EPDM rubber compound resistant to most animal and vegetable products and by-products
• A hard gray rubber blade is available
• Engineered for superior push/pull performance
• All steel frame with rounded corners for protection and safety in shipping
• Straight frames are equipped with a built in scraper
• Socket accepts a standard 1 1/8″ tapered handle
• T-66, 66, and PCT-97 sockets are also available
• The refill blade is the 1900 Line

This is Haviland’s top selling window squeegee.  The plated-steel frame provides ideal combination of strength and economy and the 2-ply red thermal rubber blend blades yield performance superior to similar looking products.  This window squeegee provides professional results at a fraction of the cost.

• Plated steel frame
• 3/16” x 1” 2-ply red thermal rubber blend blades
• The refill blades are the Z Line

A heavy-gauge plated steel frame assures years of service.  The wiping blade is off-white Neoprene backed by a white vinyl cushion blade.  This window squeegee is strong enough to use in applying grout to tile.

• Heavy gauge plated steel frame
• 3/32” x 11/4” off-white Neoprene service blade
• 3/32” x 1” white vinyl backup blade
• The replacement blade is the R Line

This aluminum channel window squeegee provides a dual edge “built in” blade refill.  The rubber blade is soft and pliable with a new no slip grip socket clip.

• Aluminum frame
• No slip grip socket clip
• 3/16” x 1” black EPDM blend rubber blade
• Built in refill blade
• The refill blade is the MPLR Line

This versatile squeegee is duo-extruded.  A special die is used to extrude molten materials to form a strong, durable bond between the blade and the frame.  A good all around inexpensive unit.  The Easy Clean is available in six different colors; red, brown, yellow, blue, white, and green (HACCP colors).

• Dishwasher safe up to 210 degrees F
• Made from FDA approved ingredients
• Lightweight for ease of use

This squeegee is 99.9% effective against reducing the MRSA bacteria. It features a hand-held plastic frame with a Microbe Spiker blade.  The blue closed-cell foam rubber squeegee is embedded with an antimicrobial agent that attracts and attacks surface microbes by physical means.  There is no opportunity for cell adaptation or development of microbial resistance.  Because the agent is embedded into the entirety of the foam, it does not lose potency over time.  Can be used on wet or dry surfaces and destroys up to 99.9% of surface microbes.

It is recommended for use on any surface where cross contamination is a concern.

• Zinc plated steel frame
• Socket is easy to position
• One  3/8” x 11/2” medium density closed-cell foam rubber blade
• Antimicrobial agent is EPA registered and USDA accepted
• Reduces the cost of cleaning/no chemicals needed
• Environmentally friendly
• Blade easily cleaned with warm water

To remove tough residue from flat griddles, use the “Sizzler Plus.”  It features the same great silicone blade as our “Sizzler” grill squeegee, but includes a 22 gauge stainless steel scraper and a heavy-duty plated steel frame and socket.

• Heavy-duty plated steel frame
• 3/16” x 1” silicone rubber blade
• A choice of 2 handles, our AO-12 aluminum handle with an insulated grip, or 114 tapered-end wood handle
• Refill blade is the RSI Line

Two-ply red thermal rubber blend blades yield performance superior to similar looking products.  Blade is 3/16″x1″.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for H Line.

The wiping blade is off-white Neoprene backed by a white vinyl cushion blade.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for A Line.

• 3/32” x 11/4” off-white Neoprene service blade
• 3/32” x 1” white vinyl backup blade