This refill blade is 1/2” x 11/2” single medium density closed-cell Nitrile foam rubber blade.  It provides a quick dry on smooth and uneven surfaces and is recommended for use on uneven, grouted floors, and food service areas.  It is not recommended for use on abrasive surfaces.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 600 and 0600 Lines.

The red Neoprene center blade that works with the foam blade(s) to provide stability and push or pull power for liquids.  It also helps to extend the life of the blade(s).  The red Neoprene blade is 1/8” x 11/2”.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for SDS and SDC Lines.

Refill consists of one  3/8” x 11/2” medium density closed-cell Nitrile blend foam rubber blade.  It is recommended for use on uneven, grouted floors and food service areas.  It is not recommended for use on abrasive surfaces.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for SDC Lines.

This high-grade red Nitrile reversible blade displays an excellent resistance to alkali and a moderate resistance to acids, ozone, oils, fats, greases and solvents.  It is recommended for use with petroleum based products.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for MPF Line.

This high-grade serrated Neoprene blade displays an excellent resistance to alkali and a moderate resistance to acids, ozone, oils, fats, greases and solvents.  It is recommended for use with petroleum based products. Available with 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch serrations. Standard serration is 3/16. Indicate serration depth when ordering.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 2300NSE and 02300NSE Lines.

Red serrated EPDM blend rubber refill blade is non-marking on light colored floors.  The durometer is 55-60 plus or minus 5.  This blade has good ozone, chemical and aging resistance properties.  It also resists animal and vegetable oils and chemicals.  A poor resistance is shown to petroleum based fluids. Available with 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch serrations. Standard serration is 3/16. Indicate serration depth when ordering.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 2100SE and 02100SE Lines.

5/16” x 2.5” Neoprene serrated rubber blade with dual-edge rubber blade that works as a  “BUILT-IN” refill that can simply be removed and flipped over. Changing the blade is quick and easy without the use of additional tools. Available with 1/8, 3/16, or 1/4 inch serrations. Standard serration is 3/16. Indicate serration depth when ordering.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for MPFSE Line.

Refill blade made exclusively for applying sealer to asphalt and/or concrete.  The blade is a top quality petroleum resistant 5/16” x 3″ Neoprene rubber blade.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 3003N Line.

The tan gum slanted edge blade offers greater flexibility when working with water based or latex sealing material.  The blade is 1/4″x 3″ and has superior resilience, tensile, elongation and abrasion resistance properties.  The light tan natural rubber is produced entirely with FDA approved ingredients per 21 CFR 177.2600.  It is non-marking and safe to use for repeated food exposure.  The blade resists most salts and mild acids.  It is not suited for strong acids, animal fats, oils, greases, and most hydrocarbons.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 3003NBE Line.

The Neoprene slanted edge blade offers greater flexibility when working with water based or latex sealing material.  The blade is 1/4″x 2.5″ and has superior resilience, tensile, elongation and abrasion resistance properties.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 3002.5NBE Line.