Toll Free: 800-325-3915   Local: 573-897-3672

1100 Line – Refill Blades for 700; 0700 and SDS Lines

1100 Line – Refill Blades for 700; 0700 and SDS Lines

Refill consists of two  3/8” x 11/2” medium density closed-cell Nitrile blend foam rubber blades.  It is recommended for use on uneven, grouted floors and food service areas.  It is not recommended for use on abrasive surfaces.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 700, 0700, 700C, 0700C, and SDS Lines.

Lengths Available:

1114 ─ 14″ Refill Squeegee Blade
1115 ─ 15″ Refill Squeegee Blade
1118 ─ 18″ Refill Squeegee Blade
1124 ─ 24″ Refill Squeegee Blade
1130 ─ 30″ Refill Squeegee Blade
1136 ─ 36″ Refill Squeegee Blade
1148 ─ 48″ Refill Squeegee Blade

Physical Properties

Dimension .250"x2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Good
Heat Resistance Good
Resilience or Rebound Fair to Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Good
Weathering Resistance Fair to Good
Low Temp Limit -10°F to -30°F
High Temp Limit 250°F

Chemical Resistance Properties

Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents Excellent
Alkali Very Good
Animal & Vegetable Oils Very Good
Aromatic Hydrocarbon Solvents Fair to Good
Oil & Gasoline Excellent
Oxygenated Solvents Poor
Water Excellent
*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.