Toll Free: 800-325-3915   Local: 573-897-3672

1900SE Line – Gray Non-Markng Refill Blade for 1400SE and 01400SE Line

1900SE Line – Gray Non-Markng Refill Blade for 1400SE and 01400SE Line

Gray serrated EPDM blend rubber refill blade is non-marking on light colored floors.  The durometer is 70 plus or minus 5.  The stiffer blade increases the integrity of the serration points. This blade has good ozone, chemical and aging resistance properties.  It also resists animal and vegetable oils and chemicals.  A poor resistance is shown to petroleum based fluids. Available with 1/8, 3/16, 1/4, 5/32, 3/8, and 1/2 inch serrations. Standard serration is 3/16. Indicate serration depth when ordering.

All blades should be stored away from UV light and motorized equipment to maintain the integrity of the blade. Refill blade for 1400SE and 01400SE Lines.

Lengths Available:

1914SE ─ 14″ Refill Squeegee Blade
1916SE ─ 16″ Refill Squeegee Blade
1918SE ─ 18″ Refill Squeegee Blade
1924SE ─ 24″ Refill Squeegee Blade
1930SE ─ 30″ Refill Squeegee Blade
1936SE ─ 36″ Refill Squeegee Blade

Physical Properties

Dimension .250"x2"
Durometer 55-60
Tensile Strength Very Good
Elongation Good
Compression Set Good
Heat Resistance Very Good
Resilience or Rebound Good
Abrasion Resistance Excellent
Tear Resistance Fair to Good
Flame Resistance Poor
Impermeability, Gas Fair to Good
Weathering Resistance Excellent
Low Temp Limit -20°F to -60°F
High Temp Limit 300°F to 350°F

Chemical Resistance Properties

Acid Good
Alcohols Fair to Good
Aliphatic Hydrocarbon Solvents Poor
Alkali Very Good
Animal & Vegetable Oils Good
Aromatic Hydrocarbon Solvents Poor
Oil & Gasoline Poor
Oxygenated Solvents Very Good
Water Excellent

*This information was gathered from other sources and is to be used only as a guide in selecting products. Changes and/or variances in blade blends or chemical strengths can offer different results.